Understand Power: Volts, Amps, Watts, Watt-hours and Cost
Editor's note: This blog was originally posted in 2015. Although electrical definitions haven’t changed, it was updated in 2023 because the cost of...
1 min read
Alan Katz
:
Jan 4, 2017 10:00:00 AM
Do you have critical equipment that could be damaged by a water leak? Packet Power is pleased to add a leak detector probe to our environmental monitoring offerings delivering a simple, cost-effective way to minimize the risk of damage from an undetected leak.
When the leak detector senses the presence of water or other similarly conductive liquids, it communicates to Packet Power's EMX monitoring application or any DCIM or BMS that supports SNMP or Modbus.
Features:
The probe connects to the environmental monitor via a 2 meter wire that can be extended as far as 15 meters. Information is then transmitted over Packet Power's wireless monitoring network. The leak detector can co-exist with temperature monitoring probes on the same environmental monitor.
The probe is available immediately. Review our environmental monitoring solutions or contact sales@packetpower.com for more information.
Editor's note: This blog was originally posted in 2015. Although electrical definitions haven’t changed, it was updated in 2023 because the cost of...
Water (or another liquid) in the wrong place can be a serious problem for any company. Electronics and water don’t mix well at all. Liquid chemicals...
Environmental monitoring and control in the data center are usually assumed to be synonymous with temperature control—how to make sure the air is at...